Pins

Pins are all 13mm shafts, with 8x27mm tops, and supplied with washers, nuts and spacers.

Prod. # Product description Material Std on Swift boats? Price (excl. tax) Price (incl. tax) Qty. Rig1A-sc 13x105mm shaft, 10x55mm base - for scull & sweep Carbon wing S/S yes       Rig1B-sc 13x105mm shaft, 10x30mm base - for L block S/S yes       Rig1C-sc 13x105mm shaft, 12x55mm base - for Euro, Gull, scull & sweep Al. wing S/S yes       Rig1D-sc 13x105mm shaft, 12x30mm base S/S no       Rig1A-sw 13x120mm shaft, 10x55mm base S/S no       Rig1B-sw 13x120mm shaft, 10x30mm base - for L block S/S yes       Rig1C-sw 13x120mm shaft, 12x55mm base - for Euro, Gull wing S/S yes       Rig1D-sw 13x120mm shaft, 12x30mm base S/S yes       Rig3A 13x100mm shaft - for carbon tube and ali back rigger S/S yes

Pin wedges (Rig10) are to change the angle (pitch) of the pin. Either fore/aft, lateral, or both. 2 pieces must be used, one above and one below the rigger block, inserted in opposing directions. Rigger height wedges (Rig11)are inserted between the saxboards and the foor of the rigger, and will increase or decrease the work height. Pin angle will also change, but pin wedges can be used to correct this.

Prod. # Product description Material Std on Swift boats? Price (excl. tax) Price (incl. tax) Qty. Rig4 Complete C bracket for carbon tube rigger S/S ~12/07       Rig4A C bracket (only) for carbon tube rigger S/S ~12/07       Rig4B Bolts to fix C bracket to carbon tube rigger (1 set) S/S ~12/07       Rig8A “ O ” shape spacer for pin 2mm (pack of 100 pieces) Pla yes       Rig9 C bracket for Al. back rigger, including back plate and 2 bolts Al. yes       Rig10 Pin wedges, 2 each of 0.5, 1.0, 1.5, 2.0, 2.5 degrees Pla no       Rig11 Rigger height wedges, 1 each of 0.5, 1.0, 1.5, 2.0, 2.5 degrees Pla no

Aluminium Riggers

See the "Rigger" page of the website for details of riggers.

Prod. # Product description Material Std on Swift boats? Price (excl. tax) Price (incl. tax) Qty. Rig20A 3 stay scull rigger frame, with European style 12mm block Al. yes       Rig21A 3 stay sweep rigger frame, with European style 12mm block Al. yes       Rig20C 3 stay scull rigger frame, for L style block Al. yes       Rig21C 3 stay sweep rigger frame, for L style block Al. yes       Rig22A Non-adjustable L block for pins 1B-sc and 1B-sw Al. yes       Rig22B Adjustable L block for 10mm pins (from RCUK at GBP10.00 each) Al. no       Rig23 2 stay scull back rigger frame Al. yes       Rig24 2 stay sweep back rigger frame Al. yes       Rig29 Scullwing rigger Al. yes       Rig30 Sweep wing rigger Al. yes       Rig31 2 stay scull gull rigger frame Al. yes       Rig32 2 stay sweep gull rigger frame Al. yes

Carbon Riggers

See the "Rigger" page of the website for details of riggers.

Prod. # Product description Material Std on Swift boats? Price (excl. tax) Price (incl. tax) Qty. Rig25 2 stay scull carbon tube rigger with C bracket (back rigger only) ~12/07 yes       Rig26 2 stay sweep carbon tube rigger with C bracket (back rigger only) ~12/07 yes       Rig27 Scull carbon wing rigger with European stye 10mm block Carb yes       Rig28 Sweep carbon wing rigger with European stye 10mm block Carb yes

Topstays

Topstays are made from 2 parts, the long pipe and (shorter) extender. The long pipe has bow and stroke side, but is the same for ALL boats (incl. 1x, 4x+, 4+, 8+ etc), but needs to be cut to the right length by the customer. There is a different extender for each boat class, but bowside and strokeside are the same.

Prod. # Product description Material Std on Swift boats? Price (excl. tax) Price (incl. tax) Qty. Rig40b Long pipe for backstay with 8.5mm hole - bowside Al. yes       Rig40s Long pipe for backstay with 8.5mm hole - strokeside Al. yes       Rig41-1x Extender for backstay for 1xcomplete Al. yes       Rig41-xx Extender for backstay for 2xcomplete Al. yes       Rig41-4x Extender for backstay for 4xcomplete Al. yes       Rig41-2- Extender for backstay for 2-complete Al. yes       Rig41-4+/- Extender for backstay for 4+/-complete Al. yes       Rig41-8+ Extender for backstay for 8+complete Al. yes       Rig41-w Extender for backstay for wing rigger boats complete Al. yes

Rigger bolts (Rig50) have square "necks" which fit the square hole in the rigger bolt washers. Because the inside and outside surfaces of ribs (shoulders) are not parallel, the head of the bolt needs to be bent, relative to the shaft. Rigger bolt washers (Rig51) are sold flat. They should be fitted to the rib/shoulder with a rigger bolt that is tightened. Then tap the "ears" of the washer around the rib/shoulder with a hammer.

Prod. # Product description Material Std on Swift boats? Price (excl. tax) Price (incl. tax) Qty. Rig45A Rigger plates for saxboards, 2x60x60mm, un-drilled small Carb yes       Rig45B Rigger plates for saxboards, 2x70x100mm, un-drilled big Carb yes       Rig50-35 6x35 rigger bolts S/S no       Rig50-40 6x40 rigger bolts S/S no       Rig50-45 6x45 rigger bolts S/S no       Rig50-50 6x50 rigger bolts S/S no       Rig50-60 6x60 rigger bolts S/S no       Rig50-80 6x80 rigger bolts S/S no       Rig50-35pb 6x35 rigger bolts - pre bent bolt head S/S yes       Rig50-40pb 6x40 rigger bolts - pre bent bolt head S/S yes       Rig50-45pb 6x45 rigger bolts - pre bent bolt head S/S yes       Rig50-50pb 6x50 rigger bolts - pre bent bolt head S/S yes       Rig50-60pb 6x60 rigger bolts - pre bent bolt head S/S yes       Rig50-80pb 6x80 rigger bolts - pre bent bolt head S/S yes       Rig51 Rigger bolt washer (square hole) - not bent S/S yes